Firing SCBs and Heat Sinks question?

Community Support for the game and it's features
User avatar
Xebeth
Deadly
Deadly
Posts: 4081
Joined: Tue Dec 30, 2014 10:22 am
CMDR: Xebeth
CMDR_Platform: PC-MAC
Contact:

Firing SCBs and Heat Sinks question?

Postby Xebeth » Sun Jun 12, 2016 4:40 pm

So after the embarrassment of not knowing how to use the X-55 s/w properly :oops: :) I now have it sending the right key presses.

The issue I have is that I fire of the SCB put the heat sink doesn't fire afterwards, if I turn off the SCB and press the button the heat sink seems inconsistent in it's firing.

Am I doing something wrong?

How do people usually get the two to fire together or at least in rapid succession?

Thanks
Image
Please make sure you have read the Mobius GroupPolicy

User avatar
tinnitus
Master
Master
Posts: 668
Joined: Mon May 16, 2016 3:06 pm
CMDR: Nar Nar Goon
CMDR_Platform: PC-MAC
Contact:

Re: Firing SCBs and Heat Sinks question?

Postby tinnitus » Sun Jun 12, 2016 4:58 pm

Use to use two chaffs (can do the same for HS) one on a key the other secondary assigned to a Joystick button. Some players fire a Heat Sink then wait for cool down then fire SCB. Others including myself stop firing and or put the guns in, temp drops fire SCB may heat up a little but is what others do.
Image]

“In real life you never get to say "OMG I died, balls to wall and fly her apart.”

User avatar
Cometborne
Master
Master
Posts: 805
Joined: Thu Mar 31, 2016 8:41 pm
CMDR: Cometborne
CMDR_Platform: None Specified
Contact:

Re: Firing SCBs and Heat Sinks question?

Postby Cometborne » Sun Jun 12, 2016 7:21 pm

Xebeth wrote:How do people usually get the two to fire together or at least in rapid succession?


I defined an in-game fire group, heat sink on primary, SCB on secondary. Switch to the group, hit both triggers, switch back. Not that great, but good enough for my stint in the Exioce CZ.
Dirty deeds done dirt cheap for reasonable prices

User avatar
CMDR Abil Midena
Expert
Expert
Posts: 379
Joined: Fri May 15, 2015 7:00 pm
CMDR: Abil Midena
CMDR_Platform: None Specified
Contact:

Re: Firing SCBs and Heat Sinks question?

Postby CMDR Abil Midena » Sun Jun 12, 2016 7:28 pm

I have it set up on my CH pro throttle so they are on the same hat. Left for SCB, up for HS. I normally do them one immediately after the other and have no issues.

I think ED has a time delay requirement between inputs, but it's really short (less than .1 sec?). Just make sure there's a 0.1 sec delay between the two and you should be fine. I use pip control via voice attack, and the 0.1 sec delay is fine there too.
My Youtube Channel
Elite - Elite - Elite

User avatar
CMDR Abil Midena
Expert
Expert
Posts: 379
Joined: Fri May 15, 2015 7:00 pm
CMDR: Abil Midena
CMDR_Platform: None Specified
Contact:

Re: Firing SCBs and Heat Sinks question?

Postby CMDR Abil Midena » Sun Jun 12, 2016 7:30 pm

Oh, and merge your double post. -_-
My Youtube Channel
Elite - Elite - Elite

User avatar
JohnLuke
Deadly
Deadly
Posts: 5172
Joined: Sun Apr 19, 2015 10:24 am
CMDR: JohnLuke
CMDR_Platform: PC-MAC
Contact:

Re: Firing SCBs and Heat Sinks question?

Postby JohnLuke » Sun Jun 12, 2016 8:12 pm

I don't use fire groups for them. On my X-52 Pro, heat sink is on T3 and SCB is on T1 through in-game key bindings. I only use a HS if I am engaged in combat at the time, and can't allow the ship to cool down before and after using the SCB. If I use a HS I fire it first, then the SCB a second or so later.
-JL

Discord Admin
Forum moderator
FB Group moderator

Image

User avatar
Xebeth
Deadly
Deadly
Posts: 4081
Joined: Tue Dec 30, 2014 10:22 am
CMDR: Xebeth
CMDR_Platform: PC-MAC
Contact:

Re: Firing SCBs and Heat Sinks question?

Postby Xebeth » Sun Jun 12, 2016 9:16 pm

CMDR Abil Midena wrote:Oh, and merge your double post. -_-


Well the other post was a somewhat different subject (programming the X-55), or more truthfully about my own personal stupidity, this is specifically about how people use SCBs and HSs together ;)
Image
Please make sure you have read the Mobius GroupPolicy

User avatar
Xebeth
Deadly
Deadly
Posts: 4081
Joined: Tue Dec 30, 2014 10:22 am
CMDR: Xebeth
CMDR_Platform: PC-MAC
Contact:

Re: Firing SCBs and Heat Sinks question?

Postby Xebeth » Sun Jun 12, 2016 10:07 pm

Right fixed (just needed to jiggle about with the timing (thanks Abil for he timing tip).

I can now fire off a HS rapidly followed by a SCB with a single button. I won't need it much but useful mid combat.
Image
Please make sure you have read the Mobius GroupPolicy

User avatar
CMDR Abil Midena
Expert
Expert
Posts: 379
Joined: Fri May 15, 2015 7:00 pm
CMDR: Abil Midena
CMDR_Platform: None Specified
Contact:

Re: Firing SCBs and Heat Sinks question?

Postby CMDR Abil Midena » Mon Jun 13, 2016 3:47 am

No sweat, glad you got it working!
My Youtube Channel
Elite - Elite - Elite


Return to “Gameplay and Features”

Who is online

Users browsing this forum: No registered users and 149 guests

i